This Cisco 350-501 PDF exam dumps can build your Cisco 350-501 knowledge and skills. Certificationmonitor provides up-to-date actual Cisco 350-501 dumps questions and answers which will help you to pass your exam in first attempt.

Visit Here: https://www.pass4itsure.com/350-501.html Updated Cisco 350-501 SPCOR Exam Dumps [2020]. Cisco 350-501 Dumps – A Perfect Way for Preparation.

Pass4itsure is famous for the well-regarded Cisco 350-501 dumps. If you are willing to practice the Cisco 350-501 exam, the answer to this Pass4itsure Cisco 350-501 exam question will prove to be the best for you.

Latest discount code “2020PASS” – Pass4itsure

Please read the picture carefully to get 12% off! 100% Valid Cisco dumps.

Cisco Internetwork Expert 350-501 exam dumps practice question online

QUESTION 1
You are testing the capabilities of MPLS OAM ping. Which statement is true?
A. An LSP is not required for the reply to reach the ingress MPLS router.
B. An LSP breakage results in the ingress MPLS router never receiving any reply.
C. MPLS OAM ping works solely with P2P LSPs.
D. MPLS OAM ping works solely with Cisco MPLS TE.
Correct Answer: B

QUESTION 2

Refer to the exhibit. Which statement about the status of the neighbor relationship between R1 and R2 is true?
A. The neighbor relationship is down because the two routers are configured with different area types.
B. The neighbor relationship is down because the two routers are in the same subnet.
C. The neighbor relationship is up because R2 is level 1 and Ievel 2 router.
D. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different
areas.
Correct Answer: A

QUESTION 3
Which regular expression query modifier function indicates the start of a string?
A. +
B. ^
C. $
D. [^]
Correct Answer: B

QUESTION 4
Which task must be performed first to implement BFD in an IS-IS environment?
A. Configure BFD in an interface configuration mode.
B. Disable Cisco Express Forwarding on all interfaces running routing protocols other than IS-IS.
C. Configure all IS-IS routers as Level 2 devices.
D. Configure BFD under the IS-IS process.
Correct Answer: D
Reference: https://www.cisco.com/c/en/us/td/docs/ios/12_0s/feature/guide/fs_bfd.html#wp1131797

QUESTION 5
After you analyze your network environment, you decide to implement a full separation model for Internet access and
MPLS L3VPN services.
For which reason do you make this decision?
A. It enables EGP and IGP to operate independently.
B. It enables you to choose whether to separate or centralize each individual service.
C. It is easier to manage a system in which services are mixed.
D. It requires only one edge router.
Correct Answer: A

QUESTION 6
Which utility can you use to locate MPLS faults?
A. MPLS LSP ping
B. QoS
C. MPLS traceroute
D. EEM
Correct Answer: C

QUESTION 7
What is the maximum capacity of a single Cisco CRS-1?
A. 64 Tb/s
B. 78 Tb/s
C. 92 Tb/s
D. 106 Tb/s
E. 128 Tb/s
Correct Answer: C

QUESTION 8
Which statement about segment routing prefix segments is true?
A. It is the longest path to a node.
B. It is linked to an adjacency SID that is globally unique within the router.
C. It is linked to a prefix SID that is globally unique within segment routing domain.
D. It requires using EIGRP to operate.
Correct Answer: C
Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/segment-routing/configuration/guide/b-segrouting-cg-asr9k/b-seg-routing-cgasr9k_chapter_010.pdf

QUESTION 9

 Refer to the exhibit. A network engineer is implementing an OSPF configuration. Based on the output, which statement
is true?
A. OSPFv3 does not run for IPv4 on FastEthernet0/0 until IPv6 routing is enabled on the router and IPv6 is enabled on
interface FastEthernet0/0.
B. In the ospfv3 1 area 1 ipv4 command, area 0 must be configured instead of area 1.
C. OSPFv3 cannot be configured for IPv4; OSPFv3 works only for IPv6.
D. “IPv6 routing not enabled” is just an informational message and OSPFv3 runs for IPv4 on interface FastEthernet0/0
anyway.
Correct Answer: C

QUESTION 10
DRAG DROP
Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right.
Select and Place:

QUESTION 11
DRAG DROP
Drag and drop the technologies from the left onto the correct definitions on the right.
Select and Place:

QUESTION 12
Refer to the exhibit.

All routers are running IS-IS. Which routers must be Level 2 routers?
A. B, D, E and G
B. A, D, E, and H
C. B, C, F, and G
D. B, C, E, F, and G
E. A, B, C, D, F, G, and H
Correct Answer: D

QUESTION 13

Refer to the exhibits. R1 and R2 are directly connected and IS-IS routing has been enabled between R1 and R2. R1
generates the above log message periodically.
Based on this output, which statement is true?
A. IS-IS neighbor authentication is failing for Level 2 PDUs only.
B. IS-IS neighbor authentication is failing for Level 2 first and then for Level 1 PDUs.
C. IS-IS neighbor authentication is failing for Level 1 and Level 2 PDUs.
D. IS-IS neighbor authentication is failing for Level 1 PDUs only.
Correct Answer: D

[Drive] Cisco 350-501 exam dumps pdf 2020

Cisco 350-501 exam dumps pdf (2020, free) from Pass4itsure

https://drive.google.com/file/d/1GQrUGVFsm15a0FP0aL7h1ixNj5R7VWsA/view?usp=sharing

https://drive.google.com/file/d/15iFsowN6d3XSKHjn-bOpM1bwAl2oxeTj/view?usp=sharing

Users always confuse where from they get real material which give them a benefit for his exam therefore, we suggest you that Pass4itsure is the best site for all users in which they get all authentic Cisco 350-501 dumps material because Pass4itsure delivers you the latest Cisco 350-501 exam dumps!

ps.

Cisco 350-501 braindumps is the best way to prepare your exam with high scores. Click here: https://www.pass4itsure.com/350-501.html 350-501 Questions | 350-501 Tests | 350-501 Exams Dumps | 350-501 Exams Dumps |