Every time you take a Cisco 500-240 exam, you need to pay money and effort. This is huge for anyone. When you’re working and living all day, it’s hard and you need to take shortcuts. We did it at the fastest speed through the Cisco Mobile Backhaul for Field Engineers 500-240 exam.
Cisco 500-240 exam dumps, still very valid.
In this article, we’ll cover everything you need to know to start passing the exam now, including:
- What is the Cisco 500-240 exam?
- How to Prepare for the Cisco 500-240 exam?
- Which Cisco 500-240 exam sample questions you need to see?
let’s start.
What is Cisco 500-240 exam?
Cisco Service Provider Mobile Backhaul for Field Engineers (CMBFE) is abbreviated as 500-240 CMBFE can also be referred to as the 500-240 exam. This 40-minute exam consists of 25 to 35 questions and you can earn Cisco Channel Partner Program certification.
Now that we’ve figured out what the Cisco 500-240 exam is, let’s continue our introductory tips to improve our abilities with the powerful 500-240 exam.
2 tips for passing the 500-240 exam
If you want to improve your Cisco certification capabilities, the Cisco Channel Partner Program 500-240 exam is important to you. It’s an opportunity to attract bosses and achieve high-paying goals.
Here’s how to Prepare for the Cisco 500-240 exam:
- Getting the right Cisco 500-240 dumps is half the work
You can get https://www.pass4itsure.com/500-240.html real 500-240 dumps questions from Pass4itSure.
2. Take the Cisco 500-240 practice exam
Use the practice exam provided by the Cisco 500-240 dumps resources to improve your ability, master the answers to the exam questions, and confidently pass the final Cisco Mobile Backhaul for Field Engineers exam.
Some free Cisco 500-240 practice test examples to help you
Now you know what the Cisco 500-240 exam is and how to prepare, but what does a great Cisco 500-240 dump look like? We’re sharing some great 500-240 practice test examples to help.
Cisco 500-240 Online Q&A
QUESTION 1
Match each device series on the left with its placement in an MBH network on the right. (Not all options will be used).
QUESTION 2
What command is used to insert the core node area border router into the data path?
A. update-source loopback0
B. set path-selection backup 1 install
C. next-hop-self
D. insert-data-path
Correct Answer: C
QUESTION 3
Which technology uses two or three antennas to receive (input) the signal and two or three radios to transmit (output),
plus special signal processing to improve range, reliability, and throughput.
A. HSPA
B. CDMA
C. LTE
D. MIMO
Correct Answer: D
QUESTION 4
Which three clock types can an ASR920 router be configured as? (Choose three.)
A. Boundary clock
B. Clock
C. Ordinary clock
D. Regular clock
E. Transparent clock
F. Ordinary, Regular
Correct Answer: ACE
QUESTION 5
SyncE clocking is provided at what OSI layer?
A. Layer 3
B. Layer 2 and 3
C. Layer 1
D. Layer 2
Correct Answer: C
QUESTION 6
What are the three purposes of partitioning the backhaul network into independent IGP domains? (Choose three.)
A. to not enhance stability
B. to reduce the size of the routing and forwarding tables on individual routers
C. to ensure that reachability is not possible between domains
D. to not ensure stability
E. faster convergence
F. to enhance stability
Correct Answer: BEF
QUESTION 7
What can PTP be used to synchronize?
A. Time, frequency, phase
B. Rate
C. Phase, time
D. Frequency
Correct Answer: A
QUESTION 8
High availability at the transport network layer is provided through the combination of what three technologies? (Choose three.)
A. Alternate Route
B. Loop-Free Alternate Fast Reroute
C. BGP
D. HSRP
E. BFD
F. BGP Core and Edge Fast Reroute and Edge protection
Correct Answer: ABF
QUESTION 9
What does virtualization of the core route reflectors do?
A. limit the availability
B. does not enhance resiliency
C. enhance resiliency or availability
D. adds complexity
Correct Answer: C
QUESTION 10
Which type of backhaul network does the Cisco Unified RAN Backhaul use?
A. SONET
B. ATM
C. IP MPLS
D. TDM
Correct Answer: C
QUESTION 11
When configuring SAToP what must the framing be configured as?
A. Framed
B. Native
C. Structured
D. Unframed
Correct Answer: B
QUESTION 12
Which technology is a mechanism that emulates point-to-point connection over a packet-switched network?
A. LFA FRR
B. SyncE
C. PWE3
D. TDM
Correct Answer: C
QUESTION 13
Which two options configures an ASR920 router as a hybrid clock? (Choose two.)
A. ptp clock boundary domain 0
B. ptp clock boundary domain 0 hybrid
C. ptp clock ordinary domain 0 hybrid
D. ptp clock ordinary domain 0
E. ptp clock
Correct Answer: BC
QUESTION 14
What type of PW is the CESoPSN?
A. Structured and unstructured
B. Unstructured
C. Unframed
D. Structured
Correct Answer: D
QUESTION 15
What is the preferred method for frequency synchronization in a Unified MPLS for IP MBH Communication?
A. SyncE/IEEE 1588
B. Local devices Clocking Sync
C. IP MBH Communication doesn\\’t require Synchronization
D. NTP
Correct Answer: A
Also, Cisco 500-240 pdf Q&A share: https://drive.google.com/file/d/1tRvA_AwuiY6mZZkJ6OyGlj6QR6vvggew/view?usp=sharing
Improve your success with the more powerful Cisco 500-240 dumps!
To recap, here are the tips we swore to pass the Cisco 500-240 exam:
Locate the correct dumps
Take the test
Now, use these tricks to start with a 500-240 question example and get a powerful 500-240 dumps https://www.pass4itsure.com/500-240.html in no time (questions total 29).